1K Permanently Elastic Acrylic Paint

EPODEX ACRYLIC PROTECT+

EPODEX ACRYLIC PROTECT+ is universally applicable. This varnish can be used for various indoor and outdoor applications.

This product can be used as:

• All-Weather Varnish/Paint
• Wood Varnish/Paint
• Metal Varnish/Paint
• Plastic Varnish/Paint
• Fence Paint
• Wooden Facade Paint
• Balcony Paint

EPODEX ACRYLIC PROTECT+ is water-based, odourless, abrasion and weather resistant. Due to its special protective formula, EPODEX ACRYLIC PROTECT provides long-term protection against moisture and UV rays.

Consumption Volumes:

120-150g/m² par coating on smooth and non-absorbent surfaces. On highly absorbent surfaces, we recommend priming the surface beforehand (e.g. with an undercoat) to prevent the varnish from being absorbed.

Instructions for Use

1. Sand the substrate to improve the varnish adhesion. To do so, use EPODEX sandpaper.
2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
3. For uncoated substrates, it is recommended to apply a suitable primer (for wood, apply a coat of colourless EPODEX ACRYLIC PROTECT+ diluted with 5% water; for gypsum, apply e.g. a paint undercoat; for metal, apply e.g. zinc).
4. Mix well before use.
5. Apply a coat of varnish with a brush or foam roller and let the it dry (approx. 8h at 20°C).
6. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.

Recommendations: Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the varnish with up to 5% water. Clean tools with water immediately after use.

EPODEX ACRYLIC PROTECT+ is not block resistant and is therefore not recommended for varnishing windows, doors etc. as well as for previously painted or varnished surfaces.

EU limit value: (Cat. A/d): 130g/L (2010), max. 30g/L VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

ACRYLIC PROTECT+ Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.