Glitter Pigments

EPODEX Glitter Pigment

EPODEX Glitter Pigments are ideally suited for use in casting and laminating resins (including epoxy, polyester, and polyurethane resins) and many other applications.

Application in epoxy resins

1. Mix the glitter pigments with the resin (A-component) or with the resin-hardener mixture.
2. Recommendations for high coverage: approx. 1,5% glitter pigment by weight on total amount of resin and hardener (e.g. 15g colour pigments for 1kg resin+hardener).
3. Recommendations for low coverage: approx. 0,5% glitter pigment by weight on total quantity of resin and hardener (e.g. 5g colour pigments for 1kg resin+hardener).
4. Adjust the intensity of the effect individually by adding more or less pigment.

Caution: Due to the pigment size, the pigments sink in liquid resin. To prevent sinking, sprinkle the glitter over the poured and gelled the resin-hardener mixture and stir it in gently. Alternatively, you can pour the epoxy in sevelayers and sprinkle on the glitter pigments. The gelling time varies among the epoxy resin systems. Therefore, check the consistency before sprinkling on the glitter pigment.

To disperse pigments that have already sunk, adjust the gelling time and mix the resin-hardener mixture carefully. Make sure that mixing does not create air bubbles, as these will not escape in the gelled the resin-hardener mixture.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.