2K PRIMER

Delivery time: 1-3 working days

For non-absorbent surfaces
Water-based and vapor-permeable
No VOCs or solvents
Consumption: approximately 220g/m²
Processing time: 90 minutes for 1kg
Resin/hardener mixing ratio: 5:1 (for example, 500g of resin to 100g of hardener)

SKU: en_Bund-P-2K-GR-Geb Category: Epoxy Resins in Containers

EPODEX PRIMER 2K

EPODEX PRIMER 2K is a highly abrasion-resistant and diffusion-open primer based on epoxy resin. The water-based 2-component system is ideal for priming non-absorbent surfaces, e.g. tiles, metal, etc. PRIMER 2K is odourless and free from harmful solvents.

Instructions for Use

Apply the product at min. 15°C to max. 30°C.
The substrate must be firm, dry, sound, clean, and free from substances that may prevent good adhesion (grease and oil). Roughen the surface to enable better adhesion.
Clean and degrease the surface with EPODEX PRE-CLEANER.
Mix resin (A) with hardener (B) in a ratio of 5:1 by weight (e.g. 5kg resin: 1kg hardener). Decant the mixture into a clean container and mix again.
Working time/pot life at 20°C: approx. 50 minutes, at 25°C: approx. 35 minutes. We recommend approx. two coats.
Wait at least 12-48 hours before applying the second coat.
Can be walked on after approx. 1 day. Fully loadable after approx. 7 days. Store between 10°C and 30°C.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Ingredients, Security & Danger statements

A-Components (2K PRIMER) Danger: Polymer epoxy resin adduct; CAS-No.: 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy compounds. May produce an allergic reaction.

B-Components (2K PRIMER) Warning: 4,4′-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.