1K Permanently Elastic Acrylic Paint

1. Sand the substrate to improve the varnish adhesion. To do so, use EPODEX sandpaper.
2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
3. For uncoated substrates, it is recommended to apply a suitable primer (for wood, apply a coat of colourless EPODEX ACRYLIC PROTECT+ diluted with 5% water; for gypsum, apply e.g. a paint undercoat; for metal, apply e.g. zinc).
4. Mix well before use.
5. Apply a coat of varnish with a brush or foam roller and let the it dry (approx. 8h at 20°C).
6. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.

Recommendations: Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the varnish with up to 5% water. Clean tools with water immediately after use.

EPODEX ACRYLIC PROTECT+ is not block resistant and is therefore not recommended for varnishing windows, doors etc. as well as for previously painted or varnished surfaces.

EU limit value: (Cat. A/d): 130g/L (2010), max. 30g/L VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.