2K Epoxy Resin PRO+ - Packaging
- Premium epoxy resin system PRO+
- Ideal for surface coatings, crafts and castings up to 5cm (For smaller moulds heights up to 30cm are possible)
- Suitable for use on all surfaces such as wood, concrete, glass and more
- Working time: approx. 6h, curing time: 48-72h.
- Mixing ratio between resin and hardener: 2:1 (e.g. 1kg A : 0,5kg B)
- Base form: unpigmented/transparent. Can be coloured with EPODEX epoxy resin dyes and pigments.
| 0,75kg A+B | 15kg A+B | |
| 2K epoxy resin PRO (-A- component) | 0,5kg | 10kg |
| 2K epoxy hardener PRO+ (-B- component) | 0,25kg | 5kg |
| EP colour pastes | 7,5g (1%) | 150g (1%) |
| Metallic pigments | 11g (1,5%) | 225g (1,5%) |
| Transparent drop-in dyes | 13,5g (1,8%) | 270g (1,8%) |
| Glow-in-the-dark pigments | 11g (1,5%) | 225g (1,5%) |
| Neon pigments | 11g (1,5%) | 225g (1,5%) |
Choose freely from components A and B
| Image | ProductAction |
|---|---|
 |  |
 |  |
Instructions for use
- Always start with an epoxy resin primer to avoid high material loss and bubble formation (layer thickness: 0,5mm). For this, simply use one part of the same clear epoxy resin. Alternatively, you can use our PRO epoxy resin system for the priming. The PRO system has the advantage that it is designed for thinner layers and cures within 16-24 hours.
- Mix the contents of the resin (A) with the contents of the hardener (B) in the mixing ratio 2:1 (e.g. 2kg resin: 1kg hardener).
- Run the stirring stick along the rim and bottom of the mixing container, as material settles there. Ideally pour the mixture into a clean container and mix again. This ensures that resin (A) and hardener (B) are fully mixed.
- Apply the epoxy resin primer with a foam roller or a brush to the desired surface.
- Allow the primer to cure. The curing time varies depending on temperature and layer thickness. Please refer to our information table under the info button “Learn more” on this product page.
- Proceed with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
- To colour the main coating, mix the dyes or colour pigments supplied with the resin (A) or with the resin-hardener mixture. Adjust the colour intensity by adding more or less pigments to suit your preference.
Consumption amounts
Determine the required amount using our epoxy resin quantity calculator on this product page.
Recommended colour amount for 1kg resin+hardener:
- Colour pigments (metallic, neon and glow-in-the-dark): ca. 1,5% (15g),
- Transparent colours (except white, black and grey): 60 drops (1,8g),
- Transparent white, black and grey colours: 20 drops dye (0,6g),
- Semi-transparent colours (except white): 40 drops (1,2g) coloured dye and 20 drops (0,6g) white dye,
- Semi-transparent white: 60 drops white dye (1,8g),
- RAL colours: 1% (10g),
- Glitter pigments: ca. 1% (10g)
Customer service: For further questions contact us by phone, by e-mail or use our WhatsApp support.
Note: Please note that colours may not be represented consistently due to different lighting conditions and monitors.
Ingredients
A-componentWarning: Reaction product: bis-[4-(2,3-epoxipropoxi)phenyl]propane Oxiran, Mono[(C12-14-alkyloxy)methyl]derivate.
B-componentDanger: Reaction product: Polyoxyalkyleneamin.
Hazard warnings
A-component Danger: Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves / eye protection / face protection. IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with local/regional/national/international regulations.
B-component Danger: Harmful if inhaled, swallowed or in contact with skin. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Harmful/toxic to aquatic organisms, with long lasting effects. Avoid release to the environment. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Wear protective gloves/ protective clothing/ eye protection/ face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call POISON INFORMATION CENTRE/doctor. IF SWALLOWED: If you feel unwell call POISON INFORMATION CENTRE/doctor. Keep locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.
reviews
Related Products
